Internal Paging Group Assignment - NEC univerge SV9100 Programming Manual

Issue 4.0
Level:
IN
Description
Use Program 31-02 : Internal Paging Group Assignment to assign extensions to Internal Paging
Groups (i.e., Page Zones). The setting in this program also determines if the Internal Page Group can
receive Internal All Call Paging. The system can have up to 64 paging groups. An extension can be in
only one Internal Paging Group.
Input Data
Extension Number
Item
No.
01 Internal Paging Group Number
Assign extensions to Internal Paging Groups (i.e.,
Page Zones). The system allows up to 64 Internal
Paging Groups. An extension can be in only one
Internal Paging Group.
02
Internal All Call Paging Receiving
Allow/Prevent All Call Internal Paging for each
extension. If allowed, extension can place and
receive All Call Internal Paging announcements. If
prevented, extensions can make only (not receive)
All Call Internal Paging announcements. If
combined, Paging zones should be restricted as
well, change the internal page zone group in
Program 31-07-01 to 0.
Conditions
None
Feature Cross Reference

Paging, Internal
SV9100 Programming Manual
Program 31 : Paging Setup

31-02 : Internal Paging Group Assignment

Item
001 ~ 960
Input Data Default
0~64 0 for IP Station
1 for TDM Station
(0 = No Setting)
0 = Off
1 = On
0
2-457