NEC univerge SV9100 Programming Manual page 804

Input Data (Continued)
Item
No.
65 VAD Negotiation on SDP
Select whether or not system uses
SIP negotiation for VAD usage.
When set to '0 = Disable' system
disregards SIP negotiation result
and always enables the VAD. When
set to'1 = Enable' system uses SIP
negotiation and decides VDA usage
according to the result.
66
Voice Band Data Mode (VBD)
Enable or Disable the VBD feature.
This program has to set '1 = Enable'
when PRG15-03-03 is set '1 =
Special' and also PRG15-03-18 is '1
= Modem'
Related: PRG 15-03-03,
PRG 15-03-18
67 VBD Payload
Setup the Payload Type number
when using VBD.
70 Video Quality Mode
This program is not supported for
version 1.00 software and will be
supported in a later release.
This program specifies the SIP
trunk video quality mode.
Use this program in conjunction with
84-27-20 for Mode 1 and 84-27-21
for Mode 2 video quality settings.
Mode 1 = CIF (352x288)
Mode 2 = VGA (640x480)
71 Video CODEC
This program is not supported for
version 1.00 software and will be
supported in a later release.
This program specifies the video
CODEC. At this time only H.264 is
supported.
2-764
Item
0 = Disable
1 = Enable
0 = Disable
1 = Enable
96~127
0 = Mode 1
1 = Mode 2
0 = H.264
Input Data Default
97
Program 84 : Hardware Setup for VoIP
Issue 4.0
Profile
1~6
0
0
0
0