Change Passcode; Introduction - Honeywell XLS80e Manual

IF WRONG
PASSCODE,
THEN
ENTER CORRECT
PASSCODE,
THEN
Honeywell, Issue 9
March 2007
DISPLAYS THE
USER MENU
(SEE SECTION 4.4.1)
XLS80e Fire Alarm Control Panels
8

Change Passcode

8.1 Introduction

Three levels of passcode are provided:
a. Access 2 passcode. This passcode
permits the panel controls to be used, and
provides access to all menus except the
Configuration menu and some options on
other menus as described in Section 12.
It can be overridden by the panel keyswitch.
Note: Functions which require use of the
access 2 passcode are described in the
XLS80e Series Operating Manual
(997-474-000).
b. Access 3 passcode. This passcode
provides access to the Configuration menu.
c. Access 3A passcode. This passcode
provides access to advanced features in
the Configuration menu.
Note: Access 3 and 3A passcodes also
provide access to some options on other
menus, as described in Section 12.
Incorrect Passcodes
The appropriate passcode must be entered
when prompted. See Section 4.4.1 for an
example.
If the wrong digits (or an incomplete passcode)
are entered, the invalid passcode screen is
displayed.
From the Status: NORMAL display, repeat the
steps that resulted in the passcode prompt
being displayed.
Enter the correct passcode.
82