Text Editing; Control Matrix - Honeywell XLS80e Manual

CONTROL MATRIX:

<Entry 1 input> activates: <Entry 1 output>
<Entry 2 input> activates: <Entry 2 output>
<Entry 3 input> activates: <Entry 3 output>
⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓ ⇓
<Entry 512 input> activates: <Entry 512 output>
E.G.
Honeywell, Issue 9
March 2007
XLS80e Fire Alarm Control Panels

3.9 Text Editing

There are three types of text that can be entered
and edited:
a. The panel or site name.
b. The zone description.
c. The device location text, which is shown on
the display when the system status is not
normal (i.e. alarm, test etc.). The device
description is also used at the printer, if
fitted.
The text is entered and edited from a text editor
which uses the LCD and the panel pushbuttons.
Refer to Section 6.
For panel and zone descriptions, the text editor
is invoked from dedicated menu options
(Sections 6.4 and 6.3 respectively). For device
location text it is invoked during the Configure
Devices on Loops procedure (Sections 5.1.2.3
and 5.1.4.3) or Virtual Point Configuration
procedure (Section 15).
3.10 Control Matrix
This very versatile system allows you to define
exactly which outputs (bells, etc.) are to be
activated depending upon which inputs
(sensors, etc.) have given a fire indication.
The capacity of the system is 512 matrix
entries.
Certain auxiliary functions may be specified
using the Control Matrix.
Refer to Section 7.
16