Saving Data In A Site File - GE PM880 User Manual

S a v i n g D a t a i n a S i t e F i l e
A site file contains probe ID, calibration data and display setup
information into a file so it can be recalled at the measurement
site. Use the following steps to store the data you have entered
into a file (refer to Figure 1-9 on page 1-19 for a menu map):
A c c e s s i n g t h e S i t e M a n a g e r
1. If the menu is not active, press
2. Use the arrow key to scroll to Site and press
3. Use the arrow key to scroll to Site Manager and press
.
[ENTER]
4. Press
[MENU]
5. Use the arrow key to scroll to File and press
E n t e r i n g a S i t e N a m e
1. Use the arrow keys to scroll to New and press
screen appears similar to Figure 1-8 below.
F i g u r e 1 - 8 : N a m e E n t r y W i n d o w f o r a N e w S i t e
G e t t i n g S t a r t e d
.
.
[MENU]
[ENTER]
[ENTER]
F e b r u a r y 2 0 0 5
.
.
. The
[ENTER]
1 - 1 7