Saving Site Data; Recalling A Site - GE DigitalFlow GF868 Programming Manual

Chapter 1. Programming Site Data

1.13 Saving Site Data

The currently programmed site data may be stored in the Model GF868's non-volatile memory by saving it as a site
file. Up to ten site file names, consisting of up to five characters each, may be stored at any given time. While following
the programming instructions, refer to Figure 13 on page 89. Enter the
initial User Program screen and complete the following steps:
1. Enter a new site file name and press
site file.
Note: The option bar will show only as many choices as there are existing site files.
If ten site files are already stored in memory, an existing site file must be deleted before a new site file name can be
assigned. See Chapter 5, Clearing Data, for details.
When a site file is stored in memory, it becomes the active site file until another site file is created or retrieved. (See the
next section for instructions on retrieving a site file.) To verify that the site file has been saved, use the [ key to scroll
back to the prompt and see if the name appears on the option bar (use the [ and [ keys to scroll through
SITE NAME
the list, if necessary). Whenever a new site file name is saved, it is automatically assigned to the next available function
key. Press to leave the
[EXIT]
2. Use the [ and [ and
to measurement mode.

1.14 Recalling a Site

Any site file currently stored in the Model GF868's non-volatile memory may be recalled at any time. Up to ten site file
names, consisting of up to five characters each, may be stored at any given time. While following the programming
instructions, see Figure 13 on page 89. Enter the
Program screen and complete the following steps:
1. Use the [, [ and
Note: The option bar shows only as many choices as there are existing site files. The files are listed in chronological
order by creation date.
Upon recall, the selected site file becomes active and all of its programmed parameters become current.
The
IMPORTANT: CLOCK
the site file.
Note: If you have loaded a site file into a GF868, but the option cards are not in the same slots or programmed the
same way as when the site file was first saved, the GF868 displays a warning to review slot information. This
display does not mean that the option cards have lost their program information!
2. Use the [ and [ and
to measurement mode.
34
, or use the [, [ and
[ENT]
submenu.
SAVE
keys to select another menu, or press
[F1]-[F4]
[F1]-[F4] keys to select and recall an existing site file.
and data is not recalled with the site file, while the
I/O
keys to select another menu, or press
[F1]-[F4]
SAVE
[F1]-[F4]
submenu by pressing [ twice and
RECLL
DigitalFlow™ GF868 Programming Manual (1-Channel)
submenu by pressing [ and
keys to select and overwrite an existing
to leave the User Program and return
[EXIT]
at the initial User
[F1]
and data is recalled with
SYSTM COMM
to leave the User Program and return
[EXIT]
at the
[F4]