Setup Wizard; Wps Wizard - NETGEAR D6300 User Manual

Setup Wizard

The NETGEAR genie installation process is launched the first time you set up the modem
router. After setting up the modem router the first time, if you want to perform this task again,
you can run Setup Wizard from the Advanced tab of the genie.
To use the Setup Wizard:

1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select Setup Wizard.
The Setup Wizard page displays.
5. Select either Yes or No, I want to configure the router myself. If you select No, you are
taken to the Internet Basic Settings screen (see
6. If you selected Yes, click Next. A series of screens are displayed as the router discovers
and processes your Internet connection. Click Next when prompted to advance to the next
screen.
The Setup Wizard searches your Internet connection for servers and protocols to
determine your ISP configuration.

WPS Wizard

The WPS Wizard helps you add a WPS-capable client device (a WiFi device or computer) to
your network. On the client device, you have to either press its WPS button or locate its WPS
PIN.
To use the WPS Wizard:

1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
D6300 WiFi DSL Modem Router
Internet Basic Settings
NETGEAR genie ADVANCED Home
39
on page 28).