NETGEAR D6300 User Manual page 15

Table 1. Power On/Off LED
Icon LED Activity
Solid green
Solid amber
Off
Restore Factory
Settings
Table 2. DSL LED
Icon LED Activity
Solid green
Blinking green
Off
Table 3. Internet LED
Icon LED Activity
Solid green
Solid amber
Off
Table 4. Wireless LED
Icon LED Activity
Solid blue
Blinking blue
Off
D6300 WiFi DSL Modem Router
Description
The router is ready.
The router is starting.
Power is not supplied to the router.
LED blinks momentarily when the Restore Factory Settings button on the
bottom of the unit is pressed for 6 seconds. The Power LED then blinks red
three times when the Restore Factory Settings button is released and then
turns green as the gateway resets to the factory defaults.
Description
You have an ADSL connection. In technical terms, the ADSL port is
synchronized with an ISP's network-access device.
Indicates that the modem router is negotiating the best possible speed on
the ADSL line.
The unit is off or there is no ADSL connection.
Description
You have an Internet connection. If this connection is dropped due to an
idle time-out but the connection is still present, the LED stays green. If the
Internet connection is dropped for any other reason, the LED turns off.
The Internet (IP) connection failed. See
page 120 for troubleshooting information.
No Internet connection is detected or the device is in bridge mode (an
external device handles the ISP connection).
Description
There is wireless connectivity.
A WPS-capable device is connecting to the device.
There is no wireless connectivity. You can still plug an Ethernet cable into
one of the LAN ports to get wired connectivity.
Hardware Setup
15
Cannot Access the Internet on