Attached Devices - NETGEAR D6300 User Manual

• Idle Timeout (In minutes). If you want to change the login time-out, enter a new value in
minutes. This setting determines how long the modem router keeps the Internet
connection active after there is no Internet activity from the LAN. Entering a value of 0
(zero) means never log out.
Internet IP Address.
• Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP
automatically assigns these addresses.
• Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned. The gateway is the ISP's modem router to which your
modem router connects.
Domain Name Server (DNS) Address. The DNS server is used to look up site addresses
based on their names.
• Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP
automatically assigns this address.
• Use These DNS Servers. If you know that your ISP does not automatically transmit DNS
addresses to the modem router during login, select this option, and enter the IP address
of your ISP's primary DNS server. If a secondary DNS server address is available, enter it
also.
WiFi DSL Modem Router MAC Address. The Ethernet MAC address used by the modem
router on the Internet port. Some ISPs register the MAC address of the network interface
card in your computer when your account is first opened. They then accept traffic only from
the MAC address of that computer. This feature allows your modem router to use your
computer's MAC address (this procedure is also called cloning).
• Use Default Address. Use the default MAC address.
• Use Computer MAC Address. The modem router captures and use the MAC address of
the computer that you are now using. You have to use the one computer that is allowed
by the ISP.
• Use This MAC Address. Enter the MAC address that you want to use.

Attached Devices

You can view all computers or devices that are currently connected to your network here.
From the BASIC Home screen, select Attached Devices.
Wired devices are connected to the modem router with Ethernet cables. WiFi devices have
joined the wireless network.
• # (number). The order in which the device joined the network.
• IP Address. The IP address that the modem router assigned to this device when it joined
the network. This number can change when a device is disconnected and rejoins the
network.
• Device Name. If the device name is known, it is shown here.
D6300 WiFi DSL Modem Router
NETGEAR genie BASIC Settings
29