Cnfg - Conþgure Board Information Block - Motorola MVME2301 Installation And Use Manual

CNFG - Configure Board Information Block
CNFG - Configure Board Information Block
6
6-2
Use this command to display and configure the Board Information
Block, which is resident within the NVRAM. The board
information block contains various elements detailing specific
operational parameters of the MVME230x. The board structure for
the MVME230x is as shown in the following example:
Board (PWA) Serial Number
Board Identifier
Artwork (PWA) Identifier
MPU Clock Speed
Bus Clock Speed
Ethernet Address
Local SCSI Identifier
System Serial Number
System Identifier
License Identifier
The parameters that are quoted are left-justified character (ASCII)
strings padded with space characters, and the quotes (Ò) are
displayed to indicate the size of the string. Parameters that are not
quoted are considered data strings, and data strings are right-
justified. The data strings are padded with zeroes if the length is not
met.
The Board Information Block is factory-configured before
shipment. There is no need to modify block parameters unless the
NVRAM is corrupted.
Refer to the MVME2300-Series VME Processor Module ProgrammerÕs
Reference Guide for the actual location and other information about
the Board Information Block.
Refer to the PPCBug Firmware Package User's Manual for a
description of CNFG and examples.
= "MOT00 xxxxxxx "
= "MVME2300 "
= "01-w3260F xx B "
= "200 "
= "067 "
= 08003E20C983
= "07"
= " nnnnnnn "
= "Motorola MVME2300"
= " nnnnnnnn "