Speciþcations - Motorola MVME2301 Installation And Use Manual

Specifications
The following table lists the general specifications for the
MVME230x VME processor module. The subsequent sections detail
cooling requirements and EMC regulatory compliance.
A complete functional description of the MVME230x boards
appears in Chapter 3. Specifications for the optional PMCs can be
found in the documentation for those modules.
Characteristics
MPU
Memory
TOD clock device
Timers
Power requirements,
with no PMCs
installed (See Note)
Operating temperature 0ûC to 55ûC entry air with forced-air cooling (refer to Cooling
Storage temperature
Table B-1. MVME230 x Specifications
MPC603
200 MHz
MPC604
300 MHz
DRAM
Flash
M48T59
One watchdog timer; time-out generates reset
Four real-time 16-bit programmable timers
+12Vdc, 0mA
Ð12Vdc, 0mA
(typical)
Requirements section)
Ð40ûC to +85û C
Specifications
B
SpeciÞcations
SPECint95
(estimated =
5.2 @ 60ns EDO to 8.7 @ 50ns EDO)
16KB/16KB I/D on-chip cache
SPECint95
10.8 @ 50ns EDO
32KB/32KB I/D on-chip cache
16MB, 32MB, 64MB, or 128MB
ECC-protected
1MB via two 32-pin PLCC sockets
4MB via surface mount
8KB NVRAM
+5Vdc (±5%), 4A typical, 4.75A maximum
with MP603
+5Vdc (±5%), 4.5A typical, 5.5A maximum
with MP604
B
B-1