Clear Logging Onboard - Cisco ME 3800X Command Reference Manual

clear logging onboard

clear logging onboard
To clear all the on-board failure logging (OBFL) data except for the uptime and CLI-command
information stored in the flash memory, use the clear logging onboard command in privileged EXEC
mode.
Syntax Description module
{slot-number | all}
Defaults No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(52)EY
Usage Guidelines We recommend that you keep OBFL enabled and do not clear the data stored in the flash memory.
You can verify that the information was cleared by entering the
privileged EXEC command.
Examples These examples show how to clear all the OBFL information except for the uptime and CLI-command
information:
Switch# clear logging onboard
Clear logging onboard buffer [confirm]
PID: ME-3400E-24TS-M
Switch# clear logging onboard module all
Clear logging onboard buffer [confirm]
PID: ME-3400E-24TS-M
Related Commands Command
hw-module module logging
onboard
show logging onboard
Cisco ME 3800X and ME 3600X Switch Command Reference
2-36
clear logging onboard [module {slot-number | all}]
(Optional) The slot number is always 1 and is not relevant for the ME-3400E.
Entering clear logging onboard module 1 or clear logging onboard all has the
same result as entering clear logging onboard.
Modification
This command was introduced.
, VID: 03 , SN: FOC1225U4CY
, VID: 03 , SN: FOC1225U4CY
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
Description
Enables OBFL.
Displays OBFL information.
show logging onboard onboard
OL-28238-01