Debug Sw-Vlan Notification - Cisco ME 3800X Command Reference Manual

Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands

debug sw-vlan notification

To enable debugging of the activation and deactivation of VLAN IDs, use the debug sw-vlan
notification command in privileged EXEC mode. To disable debugging, use the no form of this
command.
Syntax Description accfwdchange
allowedvlancfgchange
fwdchange
linkchange
modechange
statechange
Though visible in the command-line help strings, the pruningcfgchange keyword is not supported.
Note
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(52)EY
Usage Guidelines The undebug sw-vlan notification command is the same as the no debug sw-vlan notification
command.
OL-28238-01
debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange | linkchange |
modechange | statechange}
no debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange |
linkchange | modechange | statechange}
Displays debug messages for VLAN manager notification of aggregated
access interface spanning-tree forward changes.
Displays debug messages for VLAN manager notification of changes to the
allowed VLAN configuration.
Displays debug messages for VLAN manager notification of spanning-tree
forwarding changes.
Displays debug messages for VLAN manager notification of interface
link-state changes.
Displays debug messages for VLAN manager notification of interface mode
changes.
Displays debug messages for VLAN manager notification of interface state
changes.
Modification
This command was introduced.
Cisco ME 3800X and ME 3600X Switch Command Reference
debug sw-vlan notification
B-33