Police - Cisco ME 3800X Command Reference Manual

police

police
To define a policer for classified traffic and to enter policy-map class police configuration mode, use the
police command in policy-map class configuration mode. A policer defines an average traffic rate, a
committed information rate (CIR), a peak information rate (PIR), and an action to take if a maximum is
exceeded. In policy-map class police configuration mode, you can specify multiple actions for a packet.
To remove a policer, use the no form of this command.
Syntax Description rate-bps
cir
cir-bps
burst-bytes
bc burst- bytes
cir percent percent
Cisco ME 3800X and ME 3600X Switch Command Reference
2-208
police {rate-bps | cir {cir-bps [burst-bytes] [bc burst-bytes] | percent percent [burst-ms] [bc
burst-ms]} [pir {pir-bps [be peak-burst] | percent percent [be peak-ms]}] [action]
[conform-action {drop | set-cos-transmit new cos-value | set-discard-class-transmit new
discard-value | set-dscp-transmit new dscp-value | set-mpls-exp-imposition-transmit
new-imposition-exp-value | set-mpls-exp-topmost transmit new-topmost-exp-value |
set-prec-transmit value new prec-value | set-qos-transmit value new qos-value| transmit}]
[exceed-action {drop | set-cos-transmit new cos-value | set-discard-class-transmit new
discard-value | set-dscp-transmit new dscp-value | set-mpls-exp-imposition-transmit
new-imposition-exp-value | set-mpls-exp-topmost transmit new-topmost-exp-value |
set-prec-transmit value new prec-value | set-qos-transmit value new qos-value| transmit}]
[violate-action {drop | set-cos-transmit new cos-value | set-discard-class-transmit new
discard-value | set-dscp-transmit new dscp-value | set-mpls-exp-imposition-transmit
new-imposition-exp-value | set-mpls-exp-topmost transmit new-topmost-exp-value |
set-prec-transmit value new prec-value | set-qos-transmit value new qos-value| transmit}]
no police {rate-bps | cir {cir-bps [burst-bytes] [bc burst-bytes] | percent percent [burst-ms] [bc
burst-ms]} [pir {pir-bps [be peak-burst] | percent percent [be peak-ms]}] [action]
[conform-action {drop | set-cos-transmit new cos-value | set-discard-class-transmit new
discard-value | set-dscp-transmit new dscp-value | set-mpls-exp-imposition-transmit
new-imposition-exp-value | set-mpls-exp-topmost transmit new-topmost-exp-value |
set-prec-transmit value new prec-value | set-qos-transmit value new qos-value| transmit}]
[exceed-action {drop | set-cos-transmit new cos-value | set-discard-class-transmit new
discard-value | set-dscp-transmit new dscp-value | set-mpls-exp-imposition-transmit
new-imposition-exp-value | set-mpls-exp-topmost transmit new-topmost-exp-value |
set-prec-transmit value new prec-value | set-qos-transmit value new qos-value| transmit}]
[violate-action {drop | set-cos-transmit new cos-value | set-discard-class-transmit new
discard-value | set-dscp-transmit new dscp-value | set-mpls-exp-imposition-transmit
new-imposition-exp-value | set-mpls-exp-topmost transmit new-topmost-exp-value |
set-prec-transmit value new prec-value | set-qos-transmit value new qos-value| transmit}]
Specifies the average traffic rate in bits per second (b/s). The range is 64000
to 10000000000.
Committed information rate (CIR) used for policing traffic.
CIR rate in b/s. The range is 64000 to 10000000000 b/s.
(Optional) Specifies the normal burst size in bytes. The range is from 8000
to 16000000.
(Optional) Conform burst. The number of acceptable burst bytes. The range
is 8000 to 1000000 bytes.
Specifies the CIR as a percentage of the bandwidth assigned to the class. The
range is from 1 to 100 percent.
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
OL-28238-01