Show Logging Onboard - Cisco ME 3400 Command Reference Manual

show logging onboard

show logging onboard
Use the show logging onboard privileged EXEC command to display the on-board failure logging
(OBFL) information.
Syntax Description module [slot-number]
clilog
environment
message
temperature
uptime
voltage
continuous
summary
start hh:mm:ss day month
year
end hh:mm:ss day month year (Optional) Display the data up to the specified time and date. For more
detail
| begin
| exclude
| include
expression
Defaults
There is no default.
Command Modes
Privileged EXEC
Command History Release
12.2(44)EY
Cisco ME 3400 Ethernet Access Switch Command Reference
2-510
show logging onboard [module [slot-number]] {{clilog | environment | message |temperature |
uptime | voltage} [continuous | detail | summary] [start hh:mm:ss day month year] [end
hh:mm:ss day month year]} [ | {begin | exclude | include} expression]
Modification
This command was introduced.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
(Optional) The module slot number is always 1 and is not relevant for
the ME-3400.
Display the OBFL CLI commands that were entered on the switch.
Display the unique device identifier (UDI) information for the switch
and for all the connected devices: the product identification (PID), the
version identification (VID), and the serial number.
Display the hardware-related system messages generated by the switch.
Display the temperature of the switch.
Display the time when the switch starts, the reason the switch restarts,
and the length of time the switch has been running since it last
restarted.
Display the system voltages of the switch.
(Optional) Display the data in the continuous file. For more
information, see the "Usage Guidelines" section.
(Optional) Display the data in the summary file. For more information,
see the "Usage Guidelines" section.
(Optional) Display the data from the specified time and date. For more
information, see the "Usage Guidelines" section.
information, see the "Usage Guidelines" section.
(Optional) Display both the continuous and summary data.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
OL-9640-10