Cisco 3845 - Security Bundle Router Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Switch
  5. 3845 - Security Bundle Router
  6. Manual

Cisco 3845 - Security Bundle Router Manual

System message guide, cisco ios release 12.2(52)ey
Hide thumbs Also See for 3845 - Security Bundle Router:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual
Cisco ME 3800X and ME 3600X Switch
System Message Guide, Cisco IOS Release
12.2(52)EY
Cisco IOS Release 12.2(52)EY
October 2010
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-23408-01

Advertisement

Table of Contents
loading

Related Manuals for Cisco 3845 - Security Bundle Router

Summary of Contents for Cisco 3845 - Security Bundle Router

  • Page 1 Cisco ME 3800X and ME 3600X Switch System Message Guide, Cisco IOS Release 12.2(52)EY Cisco IOS Release 12.2(52)EY October 2010 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387)
  • Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks.
  • Page 3 Purpose This guide describes the Cisco ME 3800X and ME 3600X switch-specific system messages that you might encounter. For a complete list of Cisco IOS system error messages, see the Cisco IOS Software System Error Messages, Cisco IOS Release 12.2.

  • Page 4: Related Publications

    Cisco ME 3800X and ME 3600X Switch Getting Started Guide • Installation Notes for the Cisco ME 3800X and ME 3600X Switch Power-Supply and Fan Modules • Regulatory Compliance and Safety Information for the Cisco ME 3800X and ME 3600X Switches •...

  • Page 5: Obtaining Documentation And Submitting A Service Request

    Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed...
  • Page 6 Preface Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...

  • Page 7: Table Of Contents

    2-14 FRNTEND_CTRLR Messages 2-15 GBIC_SECURITY Messages 2-15 GBIC_SECURITY_CRYPT Messages 2-17 GBIC_SECURITY_UNIQUE Messages 2-18 HARDWARE Messages 2-18 HCPU_PROT_MGR Messages 2-20 HLFM Messages 2-21 IDBMAN Messages 2-22 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...

  • Page 8: Spantree_Vlan_Sw Messages

    SUDI Messages 2-66 SUPERVISOR Messages 2-66 SUPQ Messages 2-67 SW_VLAN Messages 2-68 TCAMMGR Messages 2-73 UDLD Messages 2-74 VQPCLIENT Messages 2-75 N D E X Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide viii OL-23408-01...

  • Page 9: Facility Codes

    For information about system messages that are not Cisco ME switch platform-specific, see the Cisco Note IOS Software System Messages for Cisco IOS Release 12.2S.

  • Page 10: Chapter 1 System Message Overview

    “ILET Messages” section on page 2-26 Enforcement Test messages MAC_LIMIT MAC address table entries “MAC_LIMIT Messages” section on page 2-26 MAC_MOVE Host activity “MAC_MOVE Messages” section on page 2-27 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...
  • Page 11 2-65 SUDI Secure Unique Device “SUDI Messages” section on page 2-66 Identifier (UDI) SUPERVISOR Supervisor ASIC “SUPERVISOR Messages” section on page 2-66 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...

  • Page 12: Variable Fields

    Table 1-3 Variable Fields Representation Type of Information [dec] Decimal integer [char] Single character [chars] Character string [enet] Ethernet address (for example, 0000.FEED.00C0) Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...

  • Page 13: Error Message Traceback Reports

    If you cannot determine the nature of the error, see the “Obtaining Documentation and Submitting a Service Request” section on page v for further information. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...

  • Page 14: Error Message Traceback Reports

    Chapter 1 System Message Overview Error Message Traceback Reports Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...
  • Page 15 C H A P T E R Messages and Recovery Procedures This chapter describes the Cisco ME 3800X and 3600X switches system messages in alphabetical order by facility. Note that some messages apply only to specific switches and are never seen on the other switches.

  • Page 16: C H A P T E R 2 Messages And Recovery Procedures

    • SUPQ Messages, page 2-67 • SW_VLAN Messages, page 2-68 TCAMMGR Messages, page 2-73 • UDLD Messages, page 2-74 • VQPCLIENT Messages, page 2-75 • Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...

  • Page 17: Aclmgr Messages

    (input or output), and [dec] is the label number. Reduce other system activity to ease memory demands. Recommended Action Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...

  • Page 18: Output Interpreter

    If you still need assistance, open a case with the TAC, or provide your Cisco technical support representative with your information. the information you have gathered. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports”...
  • Page 19 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...

  • Page 20: Authmgr Messages

    Make sure that the interface is configured to support the number of hosts that Recommended Action are attached to it. Enter the shutdown interface configuration command followed by no shutdown interface configuration command to restart the interface. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...

  • Page 21: Backup_Interface Messages

    Please configure [chars] to be a trunk port. Flex Link VLAN load-balancing (VLB) detected a nontrunk port. [chars] is the Explanation interface name. Change the interface to trunking mode. Recommended Action Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...

  • Page 22: Badtransceiver Messages

    Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...

  • Page 23: Cisl Messages

    A new aggregator cannot be allocated in the group. [dec] is the affected group. Explanation Recommended Action Change the port attributes of the ports in the group so that they match and join the same aggregator. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...
  • Page 24 Make sure that the configuration of the remote ports is the same for all ports in Recommended Action the bundle. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-10 OL-23408-01...
  • Page 25 The EtherChannel mode cannot be set because LACP is not included in the software Explanation image. Install a software image that includes LACP, and set the EC mode to on. Recommended Action Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-11 OL-23408-01...
  • Page 26 Chapter 2 Messages and Recovery Procedures EC Messages Error Message EC-5-NOPAGP: Invalid EC mode, PAgP not enabled. PAgP is not included in the Cisco IOS image and that the EtherChannel mode cannot be Explanation set to desirable or auto. Recommended Action Obtain an image with PAgP included, or set the mode to on by using the channel-group channel-group-number mode on interface configuration command.

  • Page 27: Environment Messages

    Recommended Action temperature status privileged EXEC command to display the temperature sensor values and the temperature thresholds. If the message appears again, contact TAC or your Cisco representative to have the switch replaced. Error Message ENVIRONMENT-4-SECONDARY_UNDERTEMP: Internal Temperature returns to...

  • Page 28: Epm Messages

    We do not recommend using the no keepalive interface command to disable keepalives. The cause of this network loop must be found and Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-14...

  • Page 29: Frntend_Ctrlr Messages

    [dec] is the controller number. Reset the switch. If the problem is not resolved by resetting the switch, contact Recommended Action your Cisco technical support representative because there might be a problem with the switch. GBIC_SECURITY Messages Note The switch supports small form-factor pluggable (SFP) modules and does not support Gigabit Interface Converter (GBIC) modules.
  • Page 30 Output Interpreter. Use the Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports”...

  • Page 31: Gbic_Security_Crypt Messages

    The SFP module was identified as a Cisco SFP module, but the switch could not match Explanation its manufacturer with one on the known list of Cisco SFP module vendors. [chars] is the port. Ensure that the Cisco IOS software running on the switch supports the SFP Recommended Action module.

  • Page 32: Gbic_Security_Unique Messages

    Error Message GBIC_SECURITY_UNIQUE-3-DUPLICATE_GBIC: GBIC interface [dec]/[dec] is a duplicate of GBIC interface [dec]/[dec]. The SFP module was identified as a Cisco SFP module, but its vendor ID and serial Explanation number match that of another interface on the system. The first [dec]/[dec] is the interface of the duplicate SPF module, and the second [dec]/[dec] is the interface of the existing module.
  • Page 33 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-19 OL-23408-01...

  • Page 34: Hcpu_Prot_Mgr Messages

    Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-20 OL-23408-01...

  • Page 35: Hlfm Messages

    Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-21 OL-23408-01...

  • Page 36: Idbman Messages

    Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-22 OL-23408-01...
  • Page 37 Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-23...

  • Page 38: Ifmgr Messages

    IfIndex table when the corruption was detected. Recommended Action Use the delete nvram:ifindex-table privileged EXEC command to delete the IfIndex table. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-24 OL-23408-01...

  • Page 39: Igmp_Querier Messages

    PIM is disabled on the SVI, and the IGMP querier function is now enabled. [dec] is the Explanation VLAN number. No action is required. Recommended Action Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-25 OL-23408-01...

  • Page 40: Ilet Messages

    Cisco or with Cisco's authorization. If your use of this product is the cause of a support issue, Cisco may deny operation of the product, support under your warranty or under a Cisco technical support program such as Smartnet.

  • Page 41: Mac_Move Messages

    [chars] is the interface, the first [enet] is the new active ID, and the second [enet] is the ID that it replaces. No action is required. Recommended Action Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-27 OL-23408-01...

  • Page 42: Phy Messages

    Error Message PHY-4-CHECK_SUM_FAILED: SFP EEPROM data check sum failed for SFP interface [chars]. The SFP module was identified as a Cisco SFP module, but the system cannot read the Explanation vendor data information to verify whether it is correct. [chars] is the interface in which the SFP module is installed.
  • Page 43 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-29 OL-23408-01...

  • Page 44: Pimsn Messages

    Reduce the total number of VLANs and routed ports to less than 1023. To Recommended Action preserve configurations and connections across reboots, save the configuration. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-30 OL-23408-01...

  • Page 45: Platform_Env Messages

    (SFP) module, FPGA, serial peripheral interface (SPI), Joint Test Action Group (JTAG), and alarm status If the message appears again, replace the control FPGA. Recommended Action Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-31 OL-23408-01...
  • Page 46 Recommended Action If the message appears again, upgrade the control FPGA. If the message appears even after upgrading the control FPGA, contact TAC or your Cisco representative to have the switch replaced. Error Message PLATFORM_ENV-3-THERMAL_NOT_FUNCTIONING: Temperature Sensor is not functioning The temperature sensor is not working properly.
  • Page 47 Error Message PLATFORM_ENV-1-FRU_PS_OIR: FRU Power Supply [chars] The specified power supply is inserted or removed. [chars] is the power supply. Explanation No action is required. Recommended Action Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-33 OL-23408-01...

  • Page 48: Platform_Pbr Messages

    Use the set ip next-hop ip-address route-map configuration command to Recommended Action reconfigure the route map action to route the packet to the specified next hop. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-34 OL-23408-01...

  • Page 49: Platform_Pm Messages

    Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-35 OL-23408-01...

  • Page 50: Platform_Ucast Messages

    Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-36 OL-23408-01...
  • Page 51 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-37 OL-23408-01...

  • Page 52: Platform_Vlan Messages

    Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-38 OL-23408-01...

  • Page 53: Pm Messages

    An internal software error occurred in the port manager. The parameters identify the Explanation problem for Cisco technical support. The first [chars] is the error message, and the second [chars] is the filename. [dec] is the line number, and the last [chars] is the function name.
  • Page 54 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-40 OL-23408-01...
  • Page 55 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-41 OL-23408-01...
  • Page 56 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-42 OL-23408-01...
  • Page 57 [chars] is the interface name. Remove the extended-range VLAN by using the no vlan vlan-id global Recommended Action configuration command to free up resources. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-43 OL-23408-01...
  • Page 58 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-44 OL-23408-01...

  • Page 59: Port_Security Messages

    [chars] is the secure port. Identify the device that attempted to connect on the secure port. Notify your Recommended Action network system administrator of this condition. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-45 OL-23408-01...

  • Page 60: Qosmgr Messages

    Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-46...
  • Page 61 Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-47...
  • Page 62 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-48 OL-23408-01...
  • Page 63 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-49 OL-23408-01...
  • Page 64 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-50 OL-23408-01...
  • Page 65 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-51 OL-23408-01...
  • Page 66 Output Interpreter. Use the Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports”...
  • Page 67 Output Interpreter. Use the Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports”...
  • Page 68 QoS TCAM entries. Reconfigure the class map or reduce the number of classes in the policy map Recommended Action to reduce the number of TCAM entries. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-54 OL-23408-01...

  • Page 69: Rep Messages

    [char] is the reason for the failure. Correct the configuration. Run REP manual preemption on the primary edge Recommended Action port by using the rep preempt segment command. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-55 OL-23408-01...

  • Page 70: Rmon Messages

    Cisco's license terms. If your use of this product is the cause of a support issue, Cisco may deny operation of the product, support under your warranty or under a Cisco technical support program such as Smartnet.

  • Page 71: Sched Messages

    Verify that the configuration of the native VLAN ID is consistent on the interfaces on each end of the 802.1Q trunk connection. When corrected, spanning tree automatically unblocks the interfaces, as appropriate. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-57 OL-23408-01...

  • Page 72: Spantree Messages

    It is marked as loopguard-inconsistent when the message-age timer expires because no BPDUs were received from the designated bridge. This Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-58...
  • Page 73 (access or trunk). If the mode is trunk, verify that both interfaces have the same encapsulation (none or 802.1Q). When the encapsulation is consistent, spanning tree automatically unblocks the interface. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-59 OL-23408-01...
  • Page 74 Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback...
  • Page 75 Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-61 OL-23408-01...
  • Page 76 ID for the previous root port, the second [chars] is the interface ID for the new root port, and [enet] is the Ethernet address of the new root port. No action is required. Recommended Action Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-62 OL-23408-01...
  • Page 77 The interface has been deleted from VLAN. [chars] is the interface, and [dec] is the Explanation VLAN ID. No action is required. Recommended Action Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-63 OL-23408-01...

  • Page 78: Spantree_Fast Messages

    A subsystem did not add its callback functions. Use this message only for debugging. The first [chars] is the subsystem name, and the second [chars] is the function name. Recommended Action No action is required. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-64 OL-23408-01...

  • Page 79: Storm_Control Messages

    Recommended Action global configuration command to automatically re-enable the interface. You should determine and fix the root cause of the excessive traffic on the interface. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-65 OL-23408-01...

  • Page 80: Sudi Messages

    Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-66 OL-23408-01...

  • Page 81: Supq Messages

    Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-67...

  • Page 82: Sw_Vlan Messages

    Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-68 OL-23408-01...
  • Page 83 Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-69...
  • Page 84 Messages and Recovery Procedures SW_VLAN Messages reported problems. If you still need assistance, open a case with the TAC, or provide your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports”...
  • Page 85 [dec]. Explanation The VLAN manager received an unexpected error return from a Cisco IOS file system (IFS) call while reading the VLAN database. The first [chars] is the function call name, the second [chars] is the file name, [dec] is the error code, the third [chars] is the textual interpretation of the error code, and the second [dec] is the number of bytes transferred.
  • Page 86 Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback...

  • Page 87: Tcammgr Messages

    Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-73 OL-23408-01...

  • Page 88: Udld Messages

    Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-74...

  • Page 89: Vqpclient Messages

    The VMPS has specified an unknown VLAN name. [chars] is the invalid VLAN name. Explanation Recommended Action Ensure that the VLAN exists on the switch. Verify the VMPS configuration by using the show vmps privileged EXEC command. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-75 OL-23408-01...
  • Page 90 Chapter 2 Messages and Recovery Procedures VQPCLIENT Messages Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-76 OL-23408-01...
  • Page 91 See IDBMAN messages See PLATFORM_ENV messages Internet Group Management Protocol messages ETHCNTR messages See IGMP_QUERIER messages EtherChannel messages Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...
  • Page 92 PIMSN PLATFORM messages PLATFORM PM messages PLATFORM_ENV policy-based routing messages PLATFORM_PBR See PLATFORM_PBR messages PLATFORM_PM PORT_SECURITY messages PLATFORM_UCAST port manager messages PLATFORM_VLAN See PM messages Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...
  • Page 93 STORM_CONTROL messages SUDI messages VLAN manager messages SUPERVISOR messages See SW_VLAN messages supervisor queue messages VLAN Query Protocol client messages See SUPQ messages See VQPCLIENT messages Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...
  • Page 94 Index VQPCLIENT messages Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01...

This manual is also suitable for:

Me 3800xMe 3600x

Table of Contents