Related Manuals for Makita HR2800
Summary of Contents for Makita HR2800
- Page 1 INSTRUCTION MANUAL Rotary Hammer HR2800 HR2810 HR2810T HR2811F HR2811FT 008203 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
Save all warnings and For Model HR2800 instructions for future reference. ENE042-1 Intended use The term "power tool" in the warnings refers to your The tool is intended for hammer drilling and drilling in mains-operated (corded) power tool or battery-operated brick, concrete and stone. - Page 3 create sparks which may ignite the dust or fumes. may result in personal injury. Keep children and bystanders away while 15. Do not overreach. Keep proper footing and operating a power tool. Distractions can cause balance at all times. This enables better control you to lose control.
-
Page 4: Rotary Hammer Safety Warnings
27. Keep handles dry, clean and free from oil and WARNING: grease. DO NOT let comfort or familiarity with product GEB007-7 (gained from repeated use) replace strict adherence ROTARY HAMMER SAFETY to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this WARNINGS instruction manual may cause serious personal injury. - Page 5 Use the reversing switch only after the tool comes • to a complete stop. Changing the direction of For Model HR2800 rotation before the tool stops may damage the tool. 1. Action mode When you operate the tool in counterclockwise •...
-
Page 6: Torque Limiter
For models HR2810, HR2810T, HR2811F, HR2811FT output shaft. When this happens, the bit will stop turning. Rotation with hammering CAUTION: 1. Action mode As soon as the torque limiter actuates, switch off • changing knob the tool immediately. This will help prevent premature wear of the tool. -
Page 7: Depth Gauge
Depth gauge 1. Bit 2. Chuck cover 1. Depth gauge 008210 Insert the bit into the tool. Turn the bit and push it in until 008212 it engages. The depth gauge is convenient for drilling holes of After installing, always make sure that the bit is securely uniform depth. -
Page 8: Operation
Blow-out bulb (optional accessory) OPERATION 1. Blow-out bulb CAUTION: Always use the side grip (auxiliary handle) and • firmly hold the tool by both side grip and switch handle during operations. Hammer drilling operation 002449 After drilling the hole, use the blow-out bulb to clean the dust out of the hole. -
Page 9: Maintenance
MAINTENANCE CAUTION: 004224 For Model HR2800, HR2810, HR2810F Always be sure that the tool is switched off and • Use the optional drill chuck assembly. When installing it, unplugged before attempting to perform inspection refer to "Installing or removing the bit"... - Page 10 Side grip • Depth gauge • Blow-out bulb • Dust cup • Dust extractor attachment • Safety goggles • Plastic carrying case • Keyless drill chuck • NOTE: Some items in the list may be included in the tool • package as standard accessories.
- Page 12 Makita Corporation www.makita.com 884729B4...