1. Front jacking points
1. Rear jacking points
Removing and Installing the
Hood
Removing the Hood
Remove the hood as follows:
1. While grasping the hood in the headlight openings, lift
up the hood to release the lower mounting tabs from
the frame slots
(Figure
Figure 45
Figure 46
47).
1. Hood
2. Pivot the bottom of the hood upward until you can pull
the top mounting tabs from the frame slots
3. Pivot the top of hood forward and unplug the wire
connectors from the head lights
4. Remove the hood.
Installing the Hood
1. Connect the lights.
2. Insert the top mounting tabs into the frame slots
(Figure
47).
3. Insert the lower mounting tabs into the frame slots
(Figure
47).
4. Ensure that the hood is fully engaged in the top, sides,
and bottom grooves.
38
Figure 47
(Figure
(Figure
47).
47).