Maintenance; Recommended Maintenance Schedule(S) - Toro 07390 Workman HDX-Auto Operator's Manual

Maintenance

Determine the left and right sides of the machine from the
normal operating position.
Note: Looking for an Electrical Schematic or Hydraulic Schematic
for your machine? Download a free copy of the schematic by
visiting www.Toro.com and searching for your machine from
the Manuals link on the home page.
WARNING
In certain conditions, gasoline is extremely
flammable and highly explosive. A fire or explosion
from gasoline can burn you and others and can
damage property.
Avoid fire hazards and have fire protection
equipment present in the work area. Do not use an
open flame to check level or leakage of fuel, battery
electrolyte, or coolant. Do not use open pans of fuel
or flammable cleaning fluids for cleaning parts.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 2 hours
After the first 10 hours
After the first 50 hours
After the first 100 hours
Before each use or daily
Every 50 hours
Every 100 hours
Maintenance Procedure
• Torque the front and rear wheel nuts.
• Torque the front and rear wheel nuts.
• Check the adjustment of the parking brake.
• Replace the hydraulic filter.
• Change the engine oil and filter.
• Inspect opening on filter.
• Check the transmission fluid level.
• Perform the breaking-in a new machine guidelines.
• Check the engine-oil level. (Check the oil level before and after the engine is first
started and daily thereafter.)
• Check the hydraulic-fluid level. (Check the level of hydraulic fluid before the engine
is first started and daily thereafter.)
• Check the level of the coolant. Check the Coolant level at the overflow reservoir
only. Do Not remove the radiator cap. (Check the coolant level before the engine is
first started and daily thereafter.)
• Check the brake fluid level. (Check the level before the engine is first started and
daily thereafter.)
• Check the oil-pressure warning light.
• Check the tire pressure.
• Remove debris from the engine area and radiator. (Clean it more frequently in
dirty conditions.)
• Check the operation of the interlock system.
• Check the condition of the battery (every 30 days if the battery is in storage).
• Check the battery cable connections.
• Grease all bearings and bushings (lubricate more frequently in heavy duty
applications).
• Check the condition of the tires.
• Check the constant velocity boots for damage and leaking lubricant.
CAUTION
Not properly maintaining the machine could
damage it and /or cause injury to you or bystanders.
Allow only qualified and authorized personnel to
maintain, repair, adjust, and inspect the machine.
CAUTION
If you leave the key in the ignition switch, someone
could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition before you do any
maintenance.
34