Control Access To The Usb Device - NETGEAR R7000 User Manual

Note: If you do not see the USB partition that you want in the Time Machine
disk list, go to Mac finder and click that USB partition. It displays in the
Time Machine list.
12. When prompted, select the Registered User radio button.
13. Enter admin for the name and password for the password and click the Connect button.
The setup is complete and the Mac automatically schedules a full back up. You can back
up immediately if you want.

Control Access to the USB Device

You can specify the device name, workgroups, and network folders for your USB device.
To specify the USB access settings:

1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > USB Functions > ReadySHARE Storage.
5. Specify access to the USB storage device:
• Network Device Name. This is the name used to access the USB device connected
to the router. The default is readyshare.
Nighthawk AC1900 Smart WiFi Router
Share USB Devices Attached to the Router
74