Block Services From The Internet - NETGEAR R7000 User Manual

Block Services from the Internet

You can block Internet services on your network based on the type of service. You can block
the services all the time or based on a schedule.
To block services:

1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Block Services.
5. Specify when to block the services:
• To block the services all the time, select the Always radio button.
• To block the services based on a schedule, select the Per Schedule radio button.
To specify the schedule, see
page 62.
6. Click the Add button.
The Block Services Setup page displays:
7. To add a service that is in the Service Type list, select the application or service.
The settings for this service automatically display in the fields.
8. To add a service or application that is not the list, select User Defined.
a. If you know that the application uses either TCP or UDP, select the appropriate
protocol; otherwise, select TCP/UDP (both).
b. Enter the starting port and ending port numbers.
• If the service uses a single port number, enter that number in both fields.
Nighthawk AC1900 Smart WiFi Router
Schedule When to Block Internet Sites and Services
Control Access to the Internet
61
on