Table of Contents
Advertisement
7.
Select the Wireless Repeater radio button.
8.
In the Repeater IP Address field, type the IP address of the repeater router.
This IP address must be in the same subnet as the base station, but different from the
LAN IP address of the base station.
9.
To prevent wireless clients from associating with the repeater and allowing LAN client
associations only, select the Disable Wireless Client Association check box.
You can leave the check box cleared if you prefer wireless clients to be able to associate
with the repeater.
10.
In the Base Station MAC Address field, enter the MAC addresses for the access point that
will be the base station.
11.
Click the Apply button.
Your changes are saved.
12.
Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the router can connect to the
Internet or share files and printers with any other computer or server connected to the
other access point.
Nighthawk AC1900 Smart WiFi Router
Specify Network Settings
144
Hide quick links:
Advertisement
Table of Contents
