NETGEAR R7000 User Manual page 44

8. In the Name field, enter a name for the VLAN tag group.
The name can be up to 10 characters.
9. In the VLAN ID field, enter a value from 1 to 4094.
This value is provided by your Internet service provider.
10. In the Priority field, enter a value from 0 to 7.
This value is provided by your Internet service provider.
11. Select a Wired Ports check box or a Wireless check box:
• If your device is connected to an Ethernet port on the router, select a Wired Ports
check box that corresponds to the Ethernet port on the router to which the device is
connected.
• If your device is connected to your router's WiFi network, select a Wireless check box
that corresponds to the router's WiFi network to which the device is connected to.
Note: You must select at least one Wired Ports or Wireless check box. You
can select more than one check box.
12. Click the Add button.
The VLAN tag group is added.
13. Click the Apply button.
Your settings are saved.
Nighthawk AC1900 Smart WiFi Router
Specify Your Internet Settings
44