Viewing Attached Devices - NETGEAR DGN2000 Reference Manual

Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual
This screen shows the following statistics:
Table 4-3. Connection Status Fields (PPPoE Network Type Example)
Field Description
Connection Time The time elapsed since the last connection to the Internet through the ADSL port.
Connecting to The connection status.
sender
Negotiation Success or Failed.
Authentication Success or Failed.
Obtaining IP The IP address assigned to the WAN port by the ADSL Internet Service Provider.
Address
Obtaining Network The network mask assigned to the WAN port by the ADSL Internet Service Provider.
Mask

Viewing Attached Devices

The Attached Devices screen contains a table of all IP devices that the modem router has
discovered on the local network. In the main menu, under Maintenance, select Attached Devices
to view the table, shown in the following screen.
Figure 4-7
For each device, the table shows the IP address, device name if available, and the Ethernet MAC
address. Note that if the modem router is rebooted, the table data is lost until the modem router
rediscovers the devices. To force the modem router to look for attached devices, click the Refresh
button.
4-10
v1.0, July 2008
Managing Your Network