NETGEAR DGN2000 Reference Manual page 71

Table 4-1. Router Status Fields (continued)
Component Field
DownStream
Modem
Connection
(continued)
Speed
UpStream
Connection
Speed
VPI
VCI
The wireless port settings are specified in the Wireless Settings screen; see
Wireless Port
Configuring Your Wireless Network" in Chapter 2
Name (SSID)
Region
Channel
Wireless AP
Broadcast
Name
WLAN2 Name (SSID)
Wireless AP
Broadcast
Name
WLAN3 Name (SSID)
Wireless AP
Broadcast
Name
WLAN4 Name (SSID)
Wireless AP
Broadcast
Name
Managing Your Network
Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual
Description
The speed at which the modem is receiving data from the ADSL line.
The speed at which the modem is transmitting data to the ADSL line.
The Virtual Path Identifier setting.
The Virtual Channel Identifier setting.
The service set ID, also known as the wireless network name for
WLAN1.
The country where the unit is set up for use.
The current channel, which determines the operating frequency.
Indicates if the access point feature is enabled for WLAN1. If disabled,
the Wireless LED on the front panel is off.
Indicates if the modem router is configured to broadcast its SSID for
WLAN1.
The wireless network name for WLAN2.
Indicates if the access point feature is enabled for WLAN2.
Indicates if the modem router is configured to broadcast its SSID for
WLAN2.
The wireless network name for WLAN3.
Indicates if the access point feature is enabled for WLAN3.
Indicates if the modem router is configured to broadcast its SSID for
WLAN3.
The wireless network name for WLAN4.
Indicates if the access point feature is enabled for WLAN4.
Indicates if the modem router is configured to broadcast its SSID for
WLAN4.
v1.0, July 2008
for details.
"Manually
4-7