Adsl Settings - NETGEAR DGN2000 Reference Manual

ADSL Settings

Note: For information about how to install ADSL filters, see the Wireless-N ADSL2+
Modem Router DGN2000 Setup Manual.
The default ADSL settings of your modem router work fine for most ISPs. However, some ISPs
use a specific multiplexing method and virtual circuit number for the virtual path identifier (VPI)
and virtual channel identifier (VCI).
Note: You must use the Setup Wizard to select the correct country for the default ADSL
settings to work.
If your ISP provided you with a multiplexing method or VPI/VCI number, then enter the setting:
1. From the main menu, select ADSL Settings.The ADSL Settings screen displays.
Figure 1-5
2. In the Multiplexing Method drop-down list, select LLC-based or VC-based.
3. For the VPI, type a number between 0 and 255. The default is 8.
4. For the VCI, type a number between 32 and 65535. The default is 35.
5. Click Apply.
Connecting Your Router to the Internet
Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual
v1.0, July 2008
1-11