NETGEAR DGN2000 Reference Manual page 89

Under Advanced in the main menu, select LAN IP Setup.
Figure 5-2
The LAN TCP/IP Setup settings are:
• IP Address. This is the LAN IP address of the modem router.
• IP Subnet Mask. This is the LAN subnet mask of the modem router. Combined with the IP
address, the IP subnet mask allows a device to know which other addresses are local to it, and
which must be reached through a gateway or modem router.
• RIP Direction. Router Information Protocol (RIP) allows a modem router to exchange routing
information with other routers. The RIP Direction selection controls how the modem router
sends and receives RIP packets. Both is the default setting.
– When set to Both or Out Only, the modem router broadcasts its routing table periodically.
– When set to Both or In Only, the modem router incorporates the RIP information that it
receives.
– When set to None, the modem router does not send any RIP packets and ignores any RIP
packets received.
Advanced Configuration
Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual
v1.0, July 2008
5-5