NETGEAR DGN2000 Reference Manual page 70

Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual
The Router Status screen provides status and usage information, including the following settings.
Table 4-1. Router Status Fields
Component Field
Account Name
Firmware
Version
The ADSL port settings apply to the Internet (ADSL) port of the modem router.
ADSL Port
MAC Address
IP Address
Network Type
IP Subnet Mask This field displays the IP subnet mask being used by the Internet
Gateway IP
Address
Domain Name
Server
The LAN settings apply to the local port of the modem router.
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask This field displays the IP subnet mask being used by the local (LAN)
The modem settings apply to the ADSL modem of the router.
Modem
ADSL Firmware
Version
Modem Status
4-6
Description
The host name that is assigned to the modem router in the Basic
Settings screen.
This field displays the modem router firmware version.
This field displays the Ethernet MAC address being used by the
Internet (ADSL) port of the modem router.
This field displays the IP address being used by the Internet (ADSL)
port of the modem router. If no address is shown, the modem router
cannot connect to the Internet.
The network type depends upon your ISP.
(ADSL) port of the modem router.
IP address used as a gateway to the Internet for computers configured
to use DHCP.
This field displays the DNS server IP addresses being used by the
modem router. These addresses are usually obtained dynamically from
the ISP.
This field displays the Ethernet MAC address being used by the local
(LAN) port of the modem router.
This field displays the IP address being used by the local (LAN) port of
the modem router. The default is 192.168.0.1.
If Off, the modem router does not assign IP addresses to PCs on the
LAN.
If On, the modem router does assign IP addresses to PCs on the LAN.
port of the modem router. The default is 255.255.255.0.
The version of the firmware.
The connection status of the modem.
v1.0, July 2008
Managing Your Network