Makita EM4350RH Original Instruction Manual page 6

Never straighten or weld damaged cutting tools.
Pay attention to the environmentέ Avoid unnecessary throttle operation for less
●
pollution and noise emissionsέ Adjust the carburetor correctlyέ
Clean the equipment at regular intervals and check that all screws and nuts
●
are well tightenedέ
σever service or store the equipment in the vicinity of naked lamesέ
●
Always store the equipment in locked rooms and with an emptied fuel tankέ
●
When cleaning, servicing and storing the equipment, always attach the cover
●
to the metal bladeέ
τbserve the relevant accident prevention instructions issued by the relevant trade associations and by the insurance companiesέ
Do not perform any modiications to the equipment as this will endanger your safetyέ
The performance of maintenance or repair work by the user is limited to those activities as described in the instruction manualέ All other work is to
be done by an Authorized Service Agentέ Use only genuine spare parts and accessories released and supplied by εAKITAέ
Use of nonάapproved accessories and tools means increased risk of accidentsέ
εAKITA will not accept any liability for accidents or damage caused by the use of nonάapproved cutting tools and ixing devices of cutting tools,
or accessoriesέ
First Aid
In case of accident make sure that a irstάaid box is available in the vicinity of
the cutting operationsέ Immediately replace any item taken from the irst aid boxέ
When asking for help, please give the following informationμ
Place of accident
●
What happened
●
σumber of injured persons
●
Kind of injuries
●
Your name
●
For European countries only
EC Declaration of Conformity
εakita declares that the following machine(s)μ
Designation of εachineμ Petrol Backpack Brushcutter
εodel σoέή Typeμ EεζγηίRώ
Conforms to the following European Directivesμ
βίίίή1ζήEC, βίίθήζβήEC
They are manufactured in accordance with the following standard or standardized documentsμ
Eσ ISτ 11κίθάβ
The technical ile in accordance with βίίθήζβήEC is available fromμ
εakita, JanάBaptist Vinkstraat β, γίιί, Belgium
The conformity assessment procedure required by Directive βίίίή1ζήEC was in accordance with annex Vέ
(With nylon cutting head)
εeasured Sound Power δevelμ 11ίέθ dB
ύuaranteed Sound Power δevelμ 111 dB
(With cutter blade)
εeasured Sound Power δevelμ 1ίζέ1 dB
ύuaranteed Sound Power δevelμ 1ίη dB
1έλέβί1ζ
Yasushi όukaya
Director
εakita, JanάBaptist Vinkstraat β, γίιί, Belgium
θ