Makita EM4350RH Original Instruction Manual page 22

ζέ Wind all but about 1ίί mm (ζ") of the cords, leaving the ends temporarily
hooked through notches (θ)έ
ηέ εount the spool in the cover as holding notches meet the eyelets (ι)έ
Unhook the ends of the cord from their temporary position and feed the cords
through the eyeletsέ
θέ Align the square slits (κ) on the housing with the eyelets (ι)έ Then push the
housing irmly onto the cover to secure itέ εake sure the latches (1) fully
spread in the coverέ
(1)
ββ
(6)
(7)
(8)
(7)
(1)