Makita EM4350RH Original Instruction Manual page 12

For nylon cutting head
Be sure to mount the nylon cutting head protector (1ί) onto the type A metal
●
blade protector (γ) assembled with the nylon cutting head protectorέ
εount the nylon cutting head protector (1ί) by sliding it into place from the
●
lank of the metal blade protector (γ)έ
Remove tape adhered to cutter, which cuts nylon cord, on nylon cutting head
●
protector (1ί)έ
CAUTIONμ
Be sure to push in nylon cutting head protector (1ί) until it is fully insertedέ
●
Take care not to injure yourself on the cutter for cutting the nylon cordέ
To remove the nylon cutting head protector (1ί), apply a hex wrench (11) into
●
the notch on the metal blade protector (γ), push it in and meanwhile slide the
nylon cutting head protector (1ί)έ
1β
(3)
(10)
(11)