Data Flow Monitor - Draytek Vigor2820 Series User Manual

3 . 1 5 . 7 D a t a F
3 . 1 5 . 7 D a t a F
This page displays the running procedure for the IP address monitored and refreshes the data
in an interval of several seconds. The IP address listed here is configured in Bandwidth
Management. You have to enable IP bandwidth limit and IP session limit before invoke Data
Flow Monitor. If not, a notification dialog box will appear to remind you enabling it.
Click Diagnostics and click Data Flow Monitor to open the web page. You can click IP
Address, TX rate, RX rate or Session link for arranging the data display.
Enable Data Flow
Monitor
Refresh Seconds
Refresh
Index
IP Address
TX rate (kbps)
RX rate (kbps)
Sessions
Action
Vigor2820 Series User's Guide
l o w M o n i t o r
l o w M o n i t o r
Check this box to enable this function.
Use the drop down list to choose the time interval of refreshing
data flow that will be done by the system automatically.
Click this link to refresh this page manually.
Display the number of the data flow.
Display the IP address of the monitored device.
Display the transmission speed of the monitored device.
Display the receiving speed of the monitored device.
Display the session number that you specified in Limit Session
web page.
Block - can prevent specified PC accessing into Internet within 5
minutes.
221