Draytek Vigor2820 Series User Manual page 145

Profile Name
Enable this profile
Netbios Naming Packet
VPN Connection Through Use the drop down menu to choose a proper WAN interface
Vigor2820 Series User's Guide
Specify a name for the profile of the LAN-to-LAN
connection.
Check here to activate this profile.
Pass – click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel while
connecting.
Block – When there is conflict occurred between the hosts on
both sides of VPN Tunnel in connecting, such function can
block data transmission of Netbios Naming Packet inside the
tunnel.
for this profile. This setting is useful for dial-out only.
WAN1 First - While connecting, the router will use WAN1
as the first channel for VPN connection. If WAN1 fails, the
router will use another WAN interface instead.
WAN1 Only - While connecting, the router will use WAN1
137