For Vigor2820 - Draytek Vigor2820 Series User Manual

1 . 2 . 1 F o r V i g
1 . 2 . 1 F o r V i g
LED
ACT (Activity)
USB
CSM
WCF
DSL
WAN2
DoS
VPN
QoS
LED on Connector
LAN
1(Giga)
LAN
2/3/4
WAN 2
Vigor2820 Series User's Guide
o r 2 8 2 0
o r 2 8 2 0
Blinking
Off
On
Blinking
On
On
On
Blinking
On
Blinking
On
Blinking
On
On
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Status Explanation
The router is powered on and running normally.
The router is powered off.
A USB device is connected and active.
The data is transmitting.
The profile of CSM (Content Security Management) for
IM/P2P application is enabled from Firewall >> General
Setup. (Such profile is established under CSM menu).
The Web Content Filter is active. (It is enabled from Firewall
>> General Setup and the web content filter profile is
established under CSM menu.)
The router is ready to access Internet through DSL link.
Slowly: The DSL connection is ready.
Quickly: The connection is tranning.
The router is ready to access Internet through WAN
connection.
It will blink while transmitting data.
The DoS/DDoS function is active.
It will blink while deleting an attack.
The VPN tunnel is active.
The QoS function is active.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is disconnected with 10/100Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is disconnected with 10Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is disconnected with 10Mbps.
3