Draytek Vigor2820 Series User Manual page 220

Send a test e-mail
SMTP Server
Mail To
Return-Path
Authentication
User Name
Password
Enable E-mail Alert
Click OK to save these settings.
For viewing the Syslog, please do the following:
1. Just set your monitor PC's IP address in the field of Server IP Address
2. Install the Router Tools in the Utility within provided CD. After installation, click on
the Router Tools>>Syslog from program menu.
3. From the Syslog screen, select the router you want to monitor. Be reminded that in
Network Information, select the network adapter used to connect to the router.
Otherwise, you won't succeed in retrieving information from the router.
212
Make a simple test for the e-mail address specified in this
page. Please assign the mail address first and click this
button to execute a test for verify the mail address is
available or not.
The IP address of the SMTP server.
Assign a mail address for sending mails out.
Assign an e-mail address of another mailbox to accept all
returned messages if fatal problems occur at the recipient
mailbox.
The e-mail address typed here also acts as the Sender
address while Vigor sends out the alert e-mails.
Check this box to activate this function while using
e-mail application.
Type the user name for authentication.
Type the password for authentication.
Check the box to send alert message to the e-mail box
while the modem detecting the item(s) you specify here.
Vigor2820 Series User's Guide