Draytek Vigor2820 Series User Manual page 168

Domain/Realm
Proxy
Account Name
Ring Port
STUN Server
External IP
SIP PING interval
Status
Profile Name
Register via
160
Display the domain name or IP address of the SIP registrar
server.
Display the domain name or IP address of the SIP proxy
server.
Display the account name of SIP address before @.
Specify which port will ring when receiving a phone call. Set
Phone, ISDN1-S0 or ISDN-TE as the default ring port for the
SIP account. If you choose Phone or ISDN1-S0, the
ISDN2-TE selection will be dimmed, vice versa. There are ten
internal lines with numbers (30 – 39) offered for ISDN-S0.
You can specify any one of them as ring port for specified SIP
account. By the way, ISDN-S0 can be used by mapping with
MSN numbers.
Type in the IP address or domain of the STUN server.
Type in the gateway IP address.
The default value is 150 (sec). It is useful for a Nortel server
NAT Traversal Support.
Show the status for the corresponding SIP account. R means
such account is registered on SIP server successfully. – means
the account is failed to register on SIP server.
Assign a name for this profile for identifying. You can type
similar name with the domain. For example, if the domain
name is draytel.org, then you might set draytel-1 in this field.
If you want to make VoIP call without register personal
information, please choose None and check the box to achieve
the goal. Some SIP server allows user to use VoIP function
without registering. For such server, please check the box of
Vigor2820 Series User's Guide