Draytek Vigor2820 Series User Manual page 113

Priority
Log
URL Access Control
Vigor2820 Series User's Guide
It determines the action that this router will apply.
Both: Pass – The router will let all the packages that match with
the conditions specified in URL Access Control and Web Feature
below passing through. When you choose this setting, both
configuration set in this page for URL Access Control and Web
Feature will be inactive.
Both: Block –The router will block all the packages that match
with the conditions specified in URL Access Control and Web
Feature below. When you choose this setting, both configuration
set in this page for URL Access Control and Web Feature will be
inactive.
Either: URL Access Control First – When all the packages
matching with the conditions specified in URL Access Control and
Web Feature below, such function can determine the priority for
the actions executed. For this one, the router will process the
packages with the conditions set below for URL first, then Web
feature second.
Either: Web Feature First –When all the packages matching with
the conditions specified in URL Access Control and Web Feature
below, such function can determine the priority for the actions
executed. For this one, the router will process the packages with
the conditions set below for web feature first, then URL second.
None – There is no log file will be recorded for this profile.
Pass – Only the log about Pass will be recorded in Syslog.
Block – Only the log about Block will be recorded in Syslog.
All – All the actions (Pass and Block) will be recorded in Syslog.
Enable URL Access Control - Check the box to activate URL
Access Control. Note that the priority for URL Access Control is
higher than Restrict Web Feature. If the web content match the
setting set in URL Access Control, the router will execute the
action specified in this field and ignore the action specified under
Restrict Web Feature.
Prevent web access from IP address - Check the box to deny any
web surfing activity using IP address, such as http://202.6.3.2. The
reason for this is to prevent someone dodges the URL Access
Control. You must clear your browser cache first so that the URL
content filtering facility operates properly on a web page that you
visited before.
Action – This setting is available only when Either : URL Access
Control First or Either : Web Feature First is selected. Pass -
Allow accessing into the corresponding webpage with the
keywords listed on the box below.
105