To Bind The Actuator - Honeywell Evohome Installation Manual

evohome Installation Guide

To bind the actuator

Press the bind button on the Radiator Controller (if
5
there are multiple HR80's in the zone, do this to all of
them). The screen should show a flashing RF icon
On the evohome Controller press
6
the green bind button
Check that (all) the Radiator Controllers display SYNC.
7
If a Radiator Controller does not display SYNC and the
flashing RF icon
Controller and press the green bind button
Press the next arrow on the evohome Controller
8
5
BOTTOM VIEW
remains, press back on the evohome
23
again