Output List; Scene Setup - Honeywell Tuxedo Touch WIFI Installation And Setup Manual

Output List

To access the Output List, from the "Home" screen, do the following:
ICON
1. Press the Automation and Output icons.
2. Enter your Authorized Code.
3. Use the OFF or ON button to control outputs.

Scene Setup

The Scene feature is used to control a single device, or multiple devices based on pre-set "Conditions,"
"Triggers," and "Actions". When a trigger/condition occurs, the action is executed. View the
"Customizable Automation Scene" training video and then do the following:
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation icon and then press
the Scene Setup icon to display the "Scene
Management" screen.
b) Press the Add icon.
c) Press the Scene Name box, enter a Scene
Name and press OK.
d) Add a "Condition," "Trigger," and
"Action" that you want to occur for this
Scene. See example below.
After each selection press Save!! !
Scene Icons
ADD DELETE
Scene Rules
• Triggers and Conditions include: Time setting, Security mode, Thermostat setting, Door Lock status
and Zones.
• Actions include: Security mode, Lights On/Off/OnForTime, Thermostat setting, and Door Lock status.
• Each Trigger event can have up to 3 Actions.
• A Trigger event and Condition cannot be the same (i.e., if setting a Trigger event for SECURITY, you
cannot set a SECURITY Condition).
• A total of 10 Scenes can be created.
Note: Determine if you need a Condition. The Condition is a 'condition' set to occur prior to a trigger
event. See example below.
Example: Turn the lights on, when the system is disarmed, but only at night.
(Condition) ... "only at Night"
(Trigger) ......when the "system is Disarmed" ...Set the Trigger to SECURITY: System Disarm.
(Action) ... Turn the "lights ON" ...
Automation (cont'd)
ACTION
ACTION
EDIT LOG
...Set the TIME condition (enter the Start and End Times.
... Set the Action to LIGHT: ON.
37
NOTES
NOTES
INFORMATION: Scenes must have at least a
trigger and 1 action to work.
Use the Data Entry Keyboard to enter all required
information.
• Press the Up Arrow key to switch to capital
letters
• Press the X key to delete
• Press the ABC/.?123 key to switch between
numerals and symbols/characters.
• Press GO to return to precious screen.
Press Delete to cancel, or Edit to change your
selections.
Condition/Trigger/Action Icons
Edit
Add
Save
Delete