Create A Group; Setting A Secondary Keypad (Controller) - Honeywell Tuxedo Touch WIFI Installation And Setup Manual

Notes:
1. Motorized door lock bolts physically lock and unlock when activated, but if the door lock installed is a
non-motorized type, activation allows the door to be manually unlocked without a
"Compatible Devices" section for further information.
Some thermostats do not update temperature status automatically (i.e., Wayne Dalton).
2.
3. When using a Kwikset Smartcode electronic deadbolt door lock (in a Scene that is programmed to
trigger when unlocked) the Scene does not trigger if using a key; enter a user code.

Create a Group

Multiple Z-wave devices can function together in a group. Up to 50 groups can be created. Follow the
procedure below to create a Group.
ICON
1. Press the Automation icon and then
press the Group Setup icon.
2. Press the Add icon and enter a "Group
Name" on the "Data Entry" keyboard.
3. Press GO.
4. Highlight the device(s) from the list that
you want to add to this Group and press
the Save icon.
Group Setup Icons
Edit
Delete

Setting a Secondary Keypad (Controller)

After all Z-Wave devices have been enrolled into the Primary Keypad (Controller), the device
information on the Primary Controller can be downloaded to a Secondary Keypad (Controller). Keep the
controllers within 10 feet of each other, apply power to the Secondary Controller and do the following:
ICON
1. On the Primary Controller:
a) Press the Automation icon from the
"Home" screen and then press the Z-
Wave Setup icon to display the "Z-Wave
Device Management" screen.
2. At the Secondary Controller:
a) Remove any Z-Wave devices that have
been added.
b) Press the Z-Wave Primary icon
(located in the lower right side of the
screen).
c) Select Yes to change this keypad to a
Secondary Controller.
Automation (cont'd)
ACTION
Add
Save
ACTION
39
NOTES
Group names (i.e., All, etc.) are displayed across the
top to the screen.
Use the Data Entry Keyboard to enter all required
information.
• Press the Up Arrow key to switch to upper case
letters
• Press the X key to delete
• Press the ABC/.?123 key to switch between
numerals and symbols/characters.
• Press GO to return to the previous screen.
If settings were changed, a pop-up window displays:
Settings saved. Select OK to save.
NOTES
If used for Remote Services, Tuxedo WiFi should not
be configured as a secondary controller. See the
Remote Services section.
When the Primary Controller icon is pressed, the
message is displayed:
"Please remove all Z-wave devices from network
first"
The message is displayed: "Scanning for Devices"
The message is displayed: "Updating Devices.
Please Wait"
key. See