Installation Options; Positioning And Securing The Machine; Steam Deflector (Protects The Countertop) - Miele G 7883 Operating Instructions Manual

,
Furniture and fittings installed
near the machine must be of a
commercial standard (able to
withstand the effects of steam).
–
–
The machine can be installed under a
continuous counter or sink drain. The
recess must be at least 60 cm wide,
60 cm deep and 82 cm high.
To ensure stability, the machine must be
aligned and screwed to the counter.
^ Open the door.
^ Secure the machine to the front edge
of the worktop using the screws to
the left and right of the front trim.
^ When not mounted undercounter,
floor mounting brackets must be
used.
Do not use silicone sealant to seal
the gaps between the machine and
any neighboring units. This will
hinder ventilation to the circulation
pump.
Depending on the requirements for an
undercounter installation, a steam
deflector can be ordered from the Miele
Technical Service Department.
The underside of the countertop is
protected from steam damage by a
stainless steel plate.
53