^ Turn the program selector to "STOP"
f .
^
Press and hold "Drying" 0 until "E22"
appears in the display.
Press and hold "Drying" 0 until "E25"
appears in the display.
^ Turn the program selector back to the
program to be changed. The current
value appears in the display after
^ Press and hold "Display" ß until the
desired value appears in the display.
^ Press the "Start" 6 button. "SP"
appears in the display.
^ Press the "Start" 6 button again. The
change has been saved.
40
^ Turn the program selector to "Stop"
f.
^
Press and hold "Drying" 0 until "E23"
appears in the display.
Press and hold "Drying" 0 until "E26"
appears in the display.
^ Turn the program selector back to the
.
program to be changed. The current
value appears in the display after
.
^ Press and hold "Display" ß until the
desired value appears in the display.
^ Press the "Start" 6 button. "SP"
appears in the display.
^ Press the "Start" 6 button again. The
change has been saved.