ATA Voice Field Reference
PSTN Line page (SPA3102)
PSTN Line page (SPA3102)
Cisco Small Business ATA Administration Guide
On the SPA3102, you can use the Voice tab > PSTN Line page to configure your
PSTN line. This page includes the following sections:
Line Enable section section on page 156
NAT Settings section section on page 195
Network Settings section section on page 195
SIP Settings section section on page 196
Proxy and Registration section section on page 199
Subscriber Information section section on page 201
Audio Configuration section section on page 202
Dial Plans section section on page 205
VoIP-To-PSTN Gateway Setup section section on page 206
VoIP Users and Passwords (HTTP Authentication) section section on
page 208
FXO (PSTN) Timer Values (sec) section section on page 209
PSTN Disconnect Detection section section on page 211
International Control (Settings) section section on page 214
Line Enable section
Line Enable
PSTN Contact List
To enable this line for service, select yes. Otherwise, select
no.
The default is yes.
Select the appropriate list:
. The default is
B
,
,
.
, or
194