Cisco SPA2102 Administration Manual page 171

ATA Voice Field Reference
Line page
Cisco Small Business ATA Administration Guide
G726-16 Enable
Echo Supp Enable
G726-24 Enable
FAX CED Detect
Enable
G726-32 Enable
FAX CNG Detect
Enable
G726-40 Enable
FAX Passthru
Codec
DTMF Process
INFO
FAX Codec
Symmetric
DTMF Process AVT To use the DTMF process AVT feature, select yes.
To enable the use of the G.726 codec at 16 kbps, select
yes. Otherwise, select no.
The default is yes.
To enable the use of the echo suppressor, select yes.
Otherwise, select no.
The default is yes.
To enable the use of the G.726 codec at 24 kbps, select
yes. Otherwise, select no.
The default is yes.
To enable detection of the fax Caller-Entered Digits (CED)
tone, select yes. Otherwise, select no.
The default is yes.
To enable the use of the G.726 codec at 32 kbps, select
yes. Otherwise, select no.
The default is yes.
To enable detection of the fax Calling Tone (CNG), select
yes. Otherwise, select no.
The default is yes.
To enable the use of the G.726 codec at 40 kbps, select
yes. Otherwise, select no.
The default is yes.
Select the codec for fax passthrough, G711u or G711a.
The default is G711u.
To use the DTMF process info feature, select yes.
Otherwise, select no.
The default is yes.
To force the ATA to use a symmetric codec during fax
passthrough, select yes. Otherwise, select no.
The default is yes.
Otherwise, select no. This field is not available for the
PAP2T.
The default is yes.
B
171