Sip Page; Sip Parameters Section - Cisco SPA2102 Administration Manual

ATA Voice Field Reference

SIP page

SIP page
Cisco Small Business ATA Administration Guide
Debug Level
You can use the Voice tab > SIP page to configure the SIP settings. With some
variations, depending on the model, this page includes the following sections:
• “SIP Parameters section” section on page 122
• “SIP Timer Values (sec) section” section on page 124
• “Response Status Code Handling section” section on page 126
• “RTP Parameters section” section on page 127
• “SDP Payload Types section” section on page 129
• “NAT Support Parameters section” section on page 130
• “Trunking Parameters section (SPA8000)” section on page 133

SIP Parameters section

Max Forward
Max Redirection
Max Auth
Determines the level of debug information that is
generated. Select 0, 1, 2, or 3 from the drop-down menu.
The higher the debug level, the more debug information is
generated.
The default is 0, which indicates that no debug information
is generated.
SIP Max Forward value, which can range from 1 to 255.
The default is 70.
Number of times an invite can be redirected to avoid an
infinite loop.
The default is 5.
Maximum number of times (from 0 to 255) a request may
be challenged.
The default is 2.
B
122