Line Page - Cisco SPA2102 Administration Manual

ATA Voice Field Reference

Line page

Line page
NOTE
Cisco Small Business ATA Administration Guide
More Echo
Suppression
Depending on the ATA device, there may be one or more Line pages (L 1, L2, and so
on). You can use the Voice tab > Line page to configure the lines for voice service.
Depending on the ATA model, some of the described settings may appear on
pages other than the Line page.
• On the SPA2102, refer to the Line pages and the corresponding User pages.
• On the SPA8800, refer to the Phone pages 1 to 4 to configure the settings for
the Phone (FXS) ports 1 to 4. Refer to the Line pages to configure the settings
for the Line (FXO) ports 1 to 4.
With some variations, depending on the model, this page includes the following
sections:
• “Line Enable section” section on page 156
• “Streaming Audio Server (SAS) section” section on page 157
• “NAT Settings section” section on page 158
• “Network Settings section” section on page 159
• “SIP Settings section” section on page 160
• “Call Feature Settings section” section on page 163
• “Proxy and Registration section” section on page 192
• “Subscriber Information section” section on page 166
• “Supplementary Service Subscription section” section on page 167
• “Audio Configuration section” section on page 169
• “VoIP Fallback to PSTN section (SPA3102 and SPA8800)” section on
page 175
Enable or disable more echo suppresion. The default is no.
This field is not found in the PAP2T.
B
155