Ring Settings Section; Fxo (Pstn) Timer Values (Sec) Section - Cisco SPA2102 Administration Manual

ATA Voice Field Reference
PSTN Line page (SPA3102)
Cisco Small Business ATA Administration Guide

Ring Settings section

Default Ring

FXO (PSTN) Timer Values (sec) section

VoIP Answer Delay Delay in seconds before auto-answering inbound VoIP calls
PSTN Answer
Delay
VoIP PIN Digit
Timeout
PSTN PIN Digit
Timeout
VoIP DLG Refresh
Intvl
1-8, Follow Line Cfg
for the FXO account. The range is 0-255.
The default is 3.
Delay in seconds before auto-answering inbound PSTN
calls after the PSTN starts ringing. The range is 0-255.
The default is 16.
Timeout to wait for the 1
VoIP caller. The range is 0-255.
The default is 10.
Timeout to wait for the 1
PSTN caller. The range is 0-255.
The default is 10.
Interval between (SIP) Dialog refresh messages sent by
the SPA to detect if the VoIP call-leg is still up. If value is set
to 0, SPA will not send refresh messages and VoIP call-leg
status is not checked by the SPA. The refresh message is a
SIP ReINVITE and the VoIP peer must response with a 2xx
response. If VoIP peer does not reply or response is not
greater than 2xx, the SPA will disconnect both PSTN and
VoIP call legs automatically. The range is 0-255.
The default is 30.
st
or subsequent PIN digits from a
st or subsequent PIN digits from a
B
209