● On deselection of the continuous mode
● On reaching the first valid limitation
● In the event of faults
4.2.3
Special features of continuous travel
Indexing axes
When an axis that is declared as an indexing axis is traversed in continuous mode, it always
traverses to indexing positions. For example, the axis traverses on to the next indexing
position in the direction of travel even if the traversing key is released in inching mode.
References:
/FB2/ Function Manual, Extended Functions; Indexing Axes (T1)
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
CAUTION
Software limit switches and working-area limitations are only activated after reference
point approach.
Note
While an axis is moving, a change of mode from JOG to AUT or MDI is not permitted
within the control.
H1: Manual travel and handwheel travel
4.2 Continuous travel
291