Dialog Text - Siemens Sinumerik 840C Diagnostics Manual

1 Alarms
1.6.2 Listing of dialog texts
DECIMAL POINT NOT
ALLOWED
DELETE DATA?
DIFFERENT PROGRAM
TYPES
DRIFT COMPENSATION
DATA ERROR
EDITING NOT ALLOWED
ENTER PASSWORD
FORMAT ERROR
FORMAT ERROR IN
DISPLAY DESCRIPTION
GENERAL DATA ERROR
GENERAL INPUT ERROR Taking over an input value
HELP NOT AVAILABLE
INPUT DISABLED
INPUT ERROR
(PROGRAM)
INPUT LINE OVERFLOW
INTERFACE ASSIGNED
KEY NOT ALLOWED
KEYSWITCH MISSING
"MB" NOT CONFIGURED
MD TRANSFER ERROR
MDA CHANNEL
ASSIGNED
MDA MEMORY
OVERFLOW
NO CORRECTION
BLOCK
1–224

Dialog text

Appears with the
following event
Taking over an input value
(e.g. with the input key)
"Delete" key has been
pressed
When copying or renaming
part programs
With semi-automatic drift
compensation
When editing part
programs
When trying to enter
protected data
Taking over an input value
(e.g. with the input key)
Cannot occur with the
user. (Only possible with
the machine manufacturer
during UMS testing.)
Taking over an input value
(e.g. with the input key)
(e.g. with the input key)
Operating the "Help" key
Taking over an input value
(e.g. with the input key)
When editing part
programs
Character input
When starting data
input/output
Taking over an input value
(e.g. with the input key)
Selecting machine data
tree or with general reset
When paging the menu
tree
Data error when fetching
machine data
MDA has already been
started in another channel
In "MDA" mode
With "Correction block"
function

Siemens AG 2001 All rights reserved 6FC5198–jAB40
What must be done
What is wrong
––
If pressed again the data
area specified will be
deleted
Only identical program
types (L to L, % to %, etc.)
can be handled
Repeat compensation
Repeat input
Enter password
The control can do nothing
with the value in this
position. See Operator's
Guide.
A format has been
specified in the display
description which does not
agree with that to be
displayed
The value cannot be taken
over. Taking over the value
would cause an error:
change value
The value was wrong.
Change value
No help is available for the
display selected
Operate keyswitch
The character selected
cannot be entered in the
part program
Max. 25 characters
Selected interface is
already operating
Refers to input key and
delete keys
Operate keyswitch
The menu block/tree is
incorrectly configured
––
Change channel or press
"Reset"
Max. 500 characters may
be entered
Correction block cannot be
selected
SINUMERIK 840C / SIMODRIVE 611–D (DA)
04/96
or