Siemens Sinumerik 840C Diagnostics Manual page 132

1 Alarms
1.5.1 Alarm description
120007 No data presetting possible
Scan
Standard default setting could not be set.
Effect
SIEMENS default setting is used.
Explanation
–
Remedy
Check path setting of data selector in SIIEMENS branch; the path must also exist in the user branch.
120008 No data storage possible here
Scan
No NC/PPLC data can be stored in the SIEMENS area.
Effect
None
Explanation
Only data transfer from the NCK in the user areas of the MMC is possible.
Remedy
Select user area.
120009 Password incorrect
Scan
An incorrect password has been entered.
Effect
See alarm message 120003 "No password set"
Explanation
None
Remedy
Enter correct password, press "Return" key and the "Set" softkey.
1–124

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
04/96
OK softkey
OK softkey
OK softkey